Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Chevy Chase?
Panel replacement in Chevy Chase typically costs $250 – $500 for the sections being swapped, whether that’s one damaged panel or a stack of them. The exact figure depends on the panel series, the material, and how well the new sections match what’s already hanging on your door. We give a written estimate before any work starts, and that written number is the price.
A dented or cracked panel is one of the few garage door problems where the fix is genuinely sectional. You don’t need a new door. You need the right panel matched to your existing one, hung square on the same track. That’s the job, and it’s usually a single visit.
Call (855) 684-8076 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical panel replacement in Chevy Chase runs $250 – $500 depending on the panel and the match.
- Most residential panels we work with are Clopay, Amarr, Wayne Dalton, Raynor or Craftsman series, and matching the profile matters more than the brand name on the door.
- One good panel is cheaper than a whole new door. We look at whether the rest of the door is sound before recommending anything.
- The estimate is free. The written estimate sets the final price.
Panel Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical residential sectional door in Chevy Chase. These are estimated ranges for the work, not a quote. The written estimate you get after we’ve seen the door is what you pay.
| Line item | Typical estimated range |
|---|---|
| Single panel replacement (steel, standard profile) | $250 – $500 |
| Multiple panels replaced together (per panel) | $250 – $500 |
| Panel replacement with track realignment | $120 – $240 added for the track work |
| Panel replacement with roller replacement | $110 – $220 added for the rollers |
| Cable repair if the cables were damaged in the same impact | $130 – $250 |
| Spring repair if the spring was affected | $180 – $340 per spring |
| Opener repair if the opener was strained by the damaged door | $120 – $320 |
| Full new door installation when panels can’t be matched | $700 – $2200 |
The lead range for this page is $250 – $500, and that covers the panel work itself. What pushes a job toward the top of that range is a panel series that’s harder to source, a door where the damaged section bent the track when it took the hit, or a run of several panels that all need to come out together. What keeps it at the bottom is a single standard steel panel on a common Clopay or Amarr profile that matches cleanly.
One thing worth saying plainly: if the panel is damaged because something hit the door, check the cables and springs too. A bent panel is visible. A stretched cable or a spring that’s taken a shock load isn’t, and we’d rather catch it on the same visit than have you call us back a week later with a door that won’t lift.
If the damage is broader than one section, our guide to panel replacement walks through what a full section-by-section swap involves. For the wider picture of what repairs to your existing door cost, see Chevy Chase Garage Door Repair.
What Affects Panel Replacement Pricing in Chevy Chase
Two doors in the same block can price differently. Here’s what moves the number.
- Panel profile and series. A standard raised-panel steel section on a Clopay or Amarr door is usually the easiest to match and sits near the bottom of the range. A long-panel or carriage-house profile, or a Wayne Dalton or Raynor door with a discontinued profile, can run higher because sourcing the match takes more work.
- Material. Steel is the most common and the most affordable to replace. Wood and composite panels cost more because they need finishing, and aluminum full-view panels are priced by the section and the glass.
- How many panels. The per-panel range is $250 – $500, so two panels land at roughly double a single. When a door takes a hit low and high at the same time, more sections come out.
- Whether the track bent with it. A panel that gets pushed in usually pushes the track with it. Track realignment runs $120 – $240 and is often part of a panel job, not a separate problem.
- Color and finish matching. Factory-finished panels in a current color match cleanly. A door that’s faded in the sun, or a color that’s been discontinued, may need a full-door consideration so the new sections don’t look like a patch.
- Age and condition of the rest of the door. We look at the springs, cables and rollers before we quote. If the door is otherwise sound, a panel swap is the right call. If the whole door is tired, we’ll tell you honestly and price the alternative too.
Chevy Chase homes sit on a mix of tight residential streets and driveways that back right up to the garage, which means a car, a bike or a mower is often the thing that finds the panel first. Those are the most common panel replacement calls we get here. The door does its job and takes the hit. The fix is usually a section, not a door.
How to Save on Panel Replacement
The biggest saving is matching the panel correctly the first time. A new section on the wrong profile means you’re paying twice, once for the wrong panel and once for the right one.
- Fix one panel instead of the whole door. If the rest of the door is straight and the springs are healthy, replacing the damaged section alone keeps you in the $250 – $500 range instead of the $700 – $2200 range for a new installation.
- Deal with the track at the same time. If the panel took a hit, have the track checked on the same visit. Combining the work is cheaper than two trips.
- Ask about matching before ordering. Bring the model or the door’s make to the estimate. Clopay, Amarr, Wayne Dalton, Raynor and Craftsman all have profile differences, and knowing which one you have speeds the job and cuts the risk of a return visit.
- Don’t skip the safety check to save a few dollars. Springs and cables carry real tension. A panel replacement that leaves a damaged cable in place is a false saving. Have it looked at.
- Get the estimate in writing. Our estimates are free, and the written estimate sets the price. Call (855) 684-8076 to book one.
FAQs – Panel Replacement Cost
How much does it cost to replace a garage door panel in Chevy Chase?
Panel replacement in Chevy Chase typically costs $250 – $500 for the sections being replaced. The final figure depends on the panel profile, the material, how many sections are involved, and whether the track needs realignment. Call (855) 684-8076 for a free estimate, and we’ll give you a written number that sets the price.
Is it cheaper to replace a panel or the whole door?
Replacing a panel is almost always cheaper. A single panel runs $250 – $500, while a full new door installation runs $700 – $2200. If the rest of your door is sound, a panel swap is the right answer. We’ll look at the springs, cables and track before quoting, and tell you plainly if the door isn’t worth a panel. Call (855) 684-8076 for an honest assessment.
Can you match the panel to my existing door?
In most cases, yes. We work with Clopay, Amarr, Wayne Dalton, Raynor and Craftsman doors, which covers the majority of residential panels in Chevy Chase. Matching is easiest on a current standard profile in a current color. On an older or discontinued series, we’ll tell you upfront whether a clean match is available or whether the door is better served by a full replacement. Call (855) 684-8076 to check your model.
How long does a panel replacement take?
A single panel replacement is usually a same-day job, often within a couple of hours once the correct panel is on hand. Multi-panel jobs and jobs that include track realignment take longer, and ordering a panel that has to be sourced adds time to the front end. Call (855) 684-8076 and we’ll give you a realistic window for your door.
What if the damage also bent the track or damaged a spring?
Then the estimate will reflect it. Track realignment runs $120 – $240, cable repair $130 – $250, and spring repair $180 – $340 per spring. A matched pair of springs is usually replaced together, so a pair costs about twice that per-spring range. We check all of it on the same visit so you’re not paying for a second trip. Call (855) 684-8076 for a full written estimate.
What Happens When You Call
You describe the door and what happened to it. We ask which brand and series it is if you know, and we book a visit. At the estimate we check the panel, the track, the rollers, the cables and the springs, then give you a written price for the panel work and anything else that needs attention. You decide. Nothing gets replaced that doesn’t need replacing.
If the door is stuck open or won’t close and you can’t wait for an appointment, call us. Emergency work is part of what we do, not an add-on. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our technicians have up to 15 years of experience across all the major brands, and we work on the door you already have. If a repair will do the job, we’ll tell you so. If you need a broader repair rather than a panel, our pages for garage door repair Chevy Chase and garage door repair Bethesda cover the full range of what we handle. Neighbors a little further out can reach us through garage door repair Silver Spring, garage door repair Rockville, garage door repair Arlington, garage door repair Alexandria, garage door repair Takoma Park and garage door repair Bethesda-Chevy Chase. For the full cost picture on door repairs of every kind, our pricing guide on garage door repair cost is worth a read.
Get Your Free Panel Replacement Estimate
Panel replacement in Chevy Chase is a $250 – $500 job in most cases, and it’s a same-day fix when the right panel matches. Don’t put up with a dented door or a cracked section when the fix is a section swap, not a new door. Call (855) 684-8076 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The written estimate sets the price, and you’ll know exactly what you’re paying before we start.
Pricing reflects the Chevy Chase market as of 2026. Chevy Chase Garage Door Repair offers free estimates – call (855) 684-8076.
Written by the team at Chevy Chase Garage Door Repair.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Tiana Whitfield"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Terrence Bryant"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carrie Fletcher