Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Chevy Chase?
Spring replacement in Chevy Chase, DC typically costs $180 – $340 for a single spring. If both springs in a matched pair are worn or broken, it’s usually best to replace them together, which puts the job at roughly twice that range. You’ll get an exact number from a written estimate before any work begins.
Most of what raises or lowers that number is in the spring itself: how it failed, which type it is, and whether the rest of the door was affecting it. Below we break down what a real Chevy Chase spring job looks like price-wise, what moves the total up or down, and where it’s smart to spend and where it isn’t.
Key Takeaways
- Single spring replacement typically runs $180 – $340 in Chevy Chase; a matched pair is about double that.
- Springs are the most common failure point on any residential door, and they almost always fail suddenly.
- Trained technicians only – torsion and extension springs are under extreme tension and cause serious injury when handled without the right tools.
- Free estimates on every spring job, and the written estimate sets the final price.
- Emergency spring jobs are a core part of what we do, not an afterthought.
If your door won’t open at all, or you heard a loud bang from the garage and found a gap where a spring used to be, call us at (855) 684-8076. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here are the typical estimated ranges for the work that shows up on a spring job in the Chevy Chase market. Real numbers land inside these ranges, and the written estimate is what you agree to.
| Service | Typical Estimated Range |
|---|---|
| Spring repair / replacement (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair (often needed when a spring breaks) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if the door slammed and bent one) | $250 – $500 |
| Opener repair (if the opener was strained) | $120 – $320 |
| General garage door repair | $150 – $600 |
| New door installation (if the door is truly at the end of its life) | $700 – $2,200 |
The spring itself is the smallest part of the price. What you’re paying for is the trained hands, the specific tools that make high-tension spring work safe, and the diagnostic step of checking why it failed. On a simple single-spring replacement, most of the cost is the technician’s time and the correct replacement spring matched to your door’s weight. When both springs are the same age and one has already snapped, replacing the pair is the call most homeowners make – because a second failure a few weeks later means paying for the same labor twice. We work on the brand you already have, whether it’s a Clopay, Amarr, Wayne Dalton, Raynor, or any of the other major door brands, so the spring gets matched to the door it’s actually on.
It helps to know the anatomy of what you’re paying for. A torsion spring (the kind mounted on a horizontal shaft above the door) stores the energy that lifts a door that’s typically hundreds of pounds. An extension spring runs along the horizontal tracks on each side instead. Both work the same way under tension, and both fail the same way: the wire fatigues, then snaps. The spring on your door was engineered for a certain number of open-close cycles. Once it’s done, no amount of oiling brings it back. Replacement is the answer.
What Affects Spring Replacement Pricing in Chevy Chase
Five things move the number most often in this area:
- Torsion vs. extension springs. Torsion springs take more tools and technique to set safely. Extension springs are usually a bit faster to access, but they can have their own safety-cable setup that has to be done right. Which type your door uses is the first thing a technician checks.
- Single spring vs. matched pair. One broken spring with its twin still healthy is one number. Two springs of the same age coming out together is about twice that. We’ll tell you which one you’re looking at and why.
- What went with the spring. A snapped spring can rip a safety cable, bend a track, or strain an opener that kept running on a broken door. Any of those adds a line item to the estimate. Cables, tracks, rollers, and panel damage are all in the ranges above.
- Door size and weight. A wide double-car door carries more spring tension than a single-car door. That changes the spring specs and how much work goes into the job.
- How the garage is built. Chevy Chase has a mix of older garages with tight overhead clearances, low headroom setups, and doors hung on older hardware. Low-headroom configurations mean less working space and a more careful job. If the door is an older wood door in a pre-war home around Chevy Chase Village or along the DC side of Western Avenue, the hardware it’s mounted on may need attention alongside the spring.
- Access and parking. Working under a car door in a tight alley or behind a narrow driveway adds time. The estimate accounts for it once we’ve seen the setup.
Our technicians have up to 15 years of experience and have seen springs fail on every kind of door that exists in Chevy Chase. Every job starts with a look at the failing part, not a sales pitch for a new one. For the full breakdown of how the repair works, see our page on spring replacement.
How to Save on Spring Replacement
The biggest savings on a spring job come from acting early, not shopping around for the lowest bid.
Replace the pair, not just the one that broke. It sounds like more money, and it is, up front. But two springs of the same age typically fail close together, and doing the job twice means paying for the labor twice. On most doors, replacing both springs in one visit is the cheaper move.
Get the whole door looked at while we’re on site. Rollers, bearings, and hinges are cheap parts. Replacing a worn roller set during a spring job saves the cost of a separate visit later. The same goes for a squeaky set of hinges you’ve been meaning to address. Bundle the small stuff with the main job.
Fix the door, don’t replace it. When the spring is the only problem, replacement isn’t the answer. The door itself usually has years left in it. Spring replacement is what gets it back in service. We only recommend a new door when the door itself is failing, and we’ll show you why.
Ask for a free estimate before you authorize anything. The estimate is where the price gets set. Call (855) 684-8076 and we’ll look, quote, and let you decide. There’s no pressure to do the work that same visit, and no fee for the estimate.
Keep the door balanced after the work is done. A door that runs smoothly and is properly lubricated puts less stress on its springs, which means they last closer to their rated cycle count. A quick check of balance once or twice a year catches small problems before they become spring jobs. If the door won’t stay at half-open, the spring setup needs looking at.
If you’ve decided the spring is the problem and want it fixed right, our Chevy Chase Garage Door Repair team handles spring, cable, track, and opener issues in one visit. No handoffs, no second contractor.
Why Springs Are a Job for a Trained Technician
Springs are the one part of your garage door that should never be handled by a homeowner. A torsion spring holds enough stored energy to do serious injury if it releases while you’re near it. The tools that control that tension (winding bars, vice grips, proper blocking) exist for a reason, and the technique for using them is learned on the job, not from a video. This isn’t a disclaimer; it’s the reason we won’t walk a homeowner through the job. A trained technician wearing the right eye protection and using the right bars can do it in a fraction of the time and with far less risk.
We work on both torsion and extension springs, and on the doors of every major brand: Clopay, Amarr, Wayne Dalton, Raynor, and more. If your door is a brand you’re used to seeing on older homes in Chevy Chase, we’ve worked on that setup. That matters when the spring needs to be matched to the door’s weight rating, not guessed at by weight class.
Because springs fail without warning, emergency service is a core part of what we do. When a door fails and you can’t get a car out, we dispatch. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. That’s not a premium tier; it’s just how a spring job is handled.
What Else Usually Goes Wrong on a Spring Job
When a spring snaps, the door is suddenly the heaviest thing in your garage with nothing holding it up. If the door drops, the impact travels through the whole door. Cables can jump their drums, tracks can bend, rollers can snap, and the opener can burn out trying to lift a door it can no longer lift. Each of those items has its own cost range, and it’s worth knowing them before you authorize work.
- Cables: $130 – $250. A torn cable usually needs replacement, not repair.
- Tracks: $120 – $240 for realignment. A bent track is sometimes fixable, sometimes not.
- Rollers: $110 – $220. Cheap insurance against a door that runs rough.
- Panels: $250 – $500 if the door came down and dented one.
- Opener: $120 – $320 if the motor was strained. We diagnose before recommending replacement, always.
The most expensive version of a spring failure is the one where the homeowner ignored a noisy or sagging door for a few months, then tried to force the door up after a snap. Let it stay down. Call us. We’ll sort out which parts need replacing and which don’t.
For the broader repair picture, our garage door repair page covers the range of fixes we handle. If the problem is actually the opener, our garage door opener repair page walks through how we diagnose LiftMaster, Chamberlain, Genie, and Craftsman units. For a full replacement when the door truly is at the end of its life, see garage door installation.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Chevy Chase?
Spring replacement in Chevy Chase typically runs $180 – $340 for one spring. If both springs on the door need replacing, expect about double that, since the pair is usually swapped together. Call (855) 684-8076 for a free estimate on your door.
Is it cheaper to repair or replace a broken garage door spring?
Repairing the spring is almost always cheaper than replacing the door. A new door installation runs $700 – $2,200; a spring replacement runs $180 – $340 for one spring. Unless the door itself is failing (rotted panels, bent tracks, cracked wood), replacing the spring is the fix. Call (855) 684-8076 and we’ll tell you which one you’re looking at.
Can I replace a garage door spring myself?
No, and we won’t walk a homeowner through it. Torsion springs are under extreme tension and can release with enough force to cause serious injury. The tools and technique are why trained technicians do this job. Call (855) 684-8076 and let a technician handle it safely.
Do I need to replace both springs at once?
Usually, yes. Two springs installed at the same time wear at the same rate, so when one breaks the other is close behind. Replacing the pair in one visit is typically cheaper than replacing each one separately, even though the pair itself costs more than one spring. Call (855) 684-8076 for an estimate that covers both options.
Can you come today for a broken spring?
Yes, broken springs are a same-day priority. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (855) 684-8076.
How long does a spring replacement take?
Most single-spring replacements are done in a single visit. A matched pair takes a bit longer. If cables, tracks, or the opener also need attention, the visit extends to cover those. We’ll give you a realistic time when we quote the job.
What to Have Ready When You Call
You don’t need to diagnose anything. A few details speed up the estimate: whether the door is a single-car or double-car door, what brand the door or opener is if you know it, and whether you heard a bang, a snap, or nothing at all. That’s enough for us to dispatch the right technician. If you don’t know, that’s fine too. We’ll figure it out on site.
We work on the brand you already have, from a decades-old Craftsman unit to a newer LiftMaster, Chamberlain, or Genie opener. If the door has a brand name we don’t cover, we’ll tell you up front rather than guess. If it’s a Clopay, Amarr, Wayne Dalton, or Raynor door, we’re on familiar ground.
Chevy Chase Garage Door Repair covers spring, cable, track, panel, and opener issues across Chevy Chase. We repair first and recommend replacement only when repair won’t hold. If another contractor has already quoted a full door replacement on a spring repair, get a second look.
When the Spring Fails
A broken spring is a same-day call for most people, and we treat it that way. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and come with the tools and training for the job. If it’s a single spring, expect $180 – $340. If it’s a matched pair, expect roughly double. The written estimate sets the final price and there’s no fee for it.
Call (855) 684-8076 for a free estimate. We’ll look, we’ll quote, and we’ll tell you honestly what needs replacing and what doesn’t.
Pricing reflects the Chevy Chase market as of 2026. Chevy Chase Garage Door Repair offers free estimates – call (855) 684-8076.
Written by the team at Chevy Chase Garage Door Repair.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Tiana Whitfield"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Terrence Bryant"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carrie Fletcher